|
The DHM mini instantaneous water heater supplies a single draw-off point where hot water is required infrequently and in small volumes. It heats the water very quickly at a DHW output of up to two and a half litres per minute. Its small dimensions enable flexible installation even in the tightest of spaces. The DHM is suitable for undersink installation. It is installed with commercially available pressure taps.
· For one or several draw-off points
· 3.5/4.4/5.7 kW (subject to model)
· 2.0 - 3.3 l/min (subject to model)
· 230 V with connecting cable
· Bare wire heating system
· For pressure-tested installation with pressure taps
· Undersink installation
|
Technical Data
|
MINI MULTI POINT UNIT
|
|
Type
|
DHM 6
|
|
Design
|
Closed
|
|
Configuration
|
Under-sink, Over-sink
|
|
Rated pressure
|
10 bar
|
|
Rated capacity
|
0,1 l
|
|
Weight
|
1,4 kg
|
|
Dimensions (H x W x D)
|
142 x 191 x 82 mm
|
|
Rated power at 220V
|
6 kW
|
|
Rated voltage
|
220 - 240 (1/N/PE ~ ...V)
|
|
Rated current
|
27 A
|
|